Exit Buttons (show all)

A range of door exit buttons

A range of door exit/eggress buttons for use with access control, door locking systems etc.

!

Heavy Duty (Push To Open) Flush Mount Exit Button

W4S-2F
Heavy duty s/s  square exit button, engraved with the text push to open, SPDT voltage free contacts, flush mount
with backbox.

W4S-2 STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN"   on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with flush mount backbox, black surface mounting box available seperataly.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Flush Box Dimensions: 97 x 50 x 40mm
Surface Box Dimensions: 115 x 115 x 45mm
Faceplate Engraving: "PUSH TO OPEN".
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 550g.                               
                                                

 

!

Heavy Duty (Push To Open) Surface Mount Exit Button

W4S-2S
Heavy duty s/s  square exit button, engraved with the text push to open, SPDT voltage free contacts, surface mount
with black backbox.

W4S-2S STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN"   on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with black surface mount backbox.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Surface Box Dimensions: 115 x 115 x 45mm
Faceplate Engraving: "PUSH TO OPEN".
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 670g.                               
                                                

 

!

Heavy Duty (Push To Open) Flush Mount Disabled Button

W4S-3F
Heavy duty s/s  square disabled exit button,engraved with the disabled symbol and text push to open , SPDT voltage free
contacts, flush mount with backbox.

W4S-3 STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN" and a disabled symbol  on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with flush mount backbox, black surface mounting box available seperataly.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Flush Box Dimensions: 97 x 50 x 40mm
Faceplate engraving: Disabled Symbol and text "PUSH TO OPEN"
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 550g.                               
                                                

 

!

Heavy Duty (Push To Open) Disabled Surface Mount Exit Button

W4S-3S
Heavy duty s/s  square disabled exit button,engraved with the disabled symbol and text push to open , SPDT voltage free
contacts, surface mount black backbox.

W4S-3S STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN" and a disabled symbol on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with black surface mount backbox.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Surface Box Dimensions: 115 x 115 x 45mm
Faceplate Engraving: Disabled Symbol and text "PUSH TO OPEN"
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 670g.                               
                                                

 

!

Unmarked wedge shaped sliding/exit button

RTES
Data Sheet
Click + to open data sheet 
Unmarked wedge shaped momentary sliding/ exit switch, separately wired enclosed 12v DC red LED visable through the clear triangular window. 50ma N/O contacts

RTES  EXIT BUTTON

Unmarked wedge shaped momentary sliding/push switch with a miniature normally open 50ma reed switchthat  is operated by an internal magnet ensuring long contact life.
A separately wired enclosed 12v DC red LED is visable through a clear
triangular window and can be used to indicate operation.

                                                TECHNICAL DATA

Mechanical Life:-  1,000,000 operations
Switching Output:- Normally Open Contacts.
Switch Operating Force:-  3.7N
Switching Capacity:-  5 - 24v DC @ 50ma.
LED Indicator: 12v DC red LED
Weight: 130g.                                     

                                                

 

!

Marked wedge shaped sliding/exit button

RTSEE
RTSEE- Data Sheet
Click + to open data sheet 
Wedge shaped momentary sliding/push switch.Engraved "push to Exit/Enter". separately wired enclosed 12v DC red LED visable through clear triangular window.

RTSEE  EXIT BUTTON

Wedge shaped momentary sliding/push switch engraved with the text "Push To Exit/Enter" in black. A miniature normally open 50ma reed switch is operated by an internal magnet ensuring long contact life. A separately wired enclosed 12v DC red LED is visable through a clear triangular window and can be used to indicate operation.

                                                TECHNICAL DATA

Mechanical Life:-  1,000,000 operations
Switching Output:- Normally Open Contacts.
Switch Operating Force:-  3.7N
Switching Capacity:-  5 - 24v DC @ 50ma.
LED Indicator: 12v DC red LED
Weight: 130g.                                     

                                                

 

!

Set of 4 interlock exit/entry buttons with LED indicators

RTEHS
RTEHS Data Sheet
Click + to open data sheet 
Set of 4 wedge shaped momentary sliding/ push switch.Engraved "push to Exit/Enter". separately wired enclosed  red LED visable through clear triangular window.
!

WRFKIT1

WRFKIT1
WRFKIT1 Data Sheet
Click + to open data sheet 
Wireless exit switch kit, includes blank surface switch, transmitter and battery compartment back box.
requires MR1E reciever box.

WRFKIT1: Blank faceplate no markings

The wireless switch range utilises the well proven collection of active satin
stainless steel buttons, dependable and responsive, minimal actuation force, large selection of engraved options.Revolutionary back box designed to eliminate unnecessary engineer call outs, aesthetic durable surface mounting for the 4x4 range of exit switches, unique integral battery change compartment and location for radio transmitter, battery cover is retained by switch - cannot be removed and lost.
Requires the MR1E (50 mtr) radio receiver.

TECHNICAL SPECIFICATION

Supply: 9V PP3 High Capacity battery
Operations: In excess of 250,000 transmissions
Back Box: Black ABS with battery compartment
Transmitter: Two channel radio transmitter for use with MR1E radio receiver.
Surface Back Box Dimensions: 115 x 115 x 45mm
Switch Faceplate: Blank no markings
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 680g.                               
                                                

!

WRFKIT2

WRFKIT2
WRFKIT2 Data Sheet
Click + to open data sheet 
Wireless exit switch kit, includes surface switch marked "Push to Open", transmitter and battery compartment back box, requires MR1E reciever box.

WRFKIT2: Engraved "Push to Open"

The wireless switch range utilises the well proven collection of active satin
stainless steel buttons, dependable and responsive, minimal actuation force, large selection of engraved options.Revolutionary back box designed to eliminate unnecessary engineer call outs, aesthetic durable surface mounting for the 4x4 range of exit switches, unique integral battery change compartment and location for radio transmitter, battery cover is retained by switch - cannot be removed and lost.
Requires the MR1E (50 mtr) radio receiver.

TECHNICAL SPECIFICATION
Supply: 9V PP3 High Capacity battery
Operations: In excess of 250,000 transmissions
Back Box: Black ABS with battery compartment
Transmitter: Two channel radio transmitter for use with MR1E radio receiver.
Surface Back Box Dimensions: 115 x 115 x 45mm
Switch Faceplate: Engraved Push To Open.
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 680g.                               
                                                

!

WRFKIT3

WRFKIT3
WRFKIT3 Data Sheet
Click + to open data sheet 
Wireless exit switch kit, includes surface switch with wheelchair logo,marked  "Push to Open", transmitter and battery compartment back box, requires reciver box

WRFKIT3: Wheelchair Logo and engraved "Push to Open"

The wireless switch range utilises the well proven collection of active satin
stainless steel buttons, dependable and responsive, minimal actuation force,
large selection of engraved options.Revolutionary  back box designed to eliminate
unnecessary engineer call outs, aesthetic durable surface mounting for the 4x4
range of exit switches, unique integral battery change compartment and location
for radio transmitter, battery cover is retained by switch - cannot be removed and lost.
Requires either the MR1E (50 mtr) radio receiver.

TECHNICAL SPECIFICATION
Supply: 9V PP3 High Capacity battery
Operations: In excess of 250,000 transmissions
Back Box: Black ABS with battery compartment
Transmitter: Two channel radio transmitter for use with MR1E radio receiver.
Surface Back Box Dimensions: 115 x 115 x 45mm
Switch Faceplate: Engraved Push To Open with wheelchair logo.
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 680g.                               
                                                

!