Disabled / Care Systems (show all)
!

Disabled Tiolet Alarm

CSOLO1
CSOLO1 Data Sheet
Click + to open data sheet 
Carecall solo disabled alarm kit with 500ma psu, control unit with 20mm LED indicator illuminated rest button and remote pull cord call point.

CARECALL SOLO1 DISABLED ALARM KIT 1

The CARECALL solo disabled alarm kit was designed to meet the demand for an emergency audio visual signalling system for disabled or handcapped persons.
The system comprises of a control unit that is installed outside the room near the point of call, the contol unit gives both visual and audible indication via a piezo sounder and large flashing 20mm red LED when a call is placed by the user. The control unit also has an illuminated reset button that is used to cancel the call at source. The user places
a call via the provided pull cord with re-assurance LED that is installed inside the room or area. Also provided for on the control unit is connections for further call points, remote reset buttons, remote sounder / indicators and a set of 1A @ 24v DC voltage free changeover relay
contacts for remote signalling to a central indicator panel giving indication as to the source of the calls. The system comes with a 12v DC @ 500ma non battery backed psu.

                                       TECHNICAL SPECIFICATIONS
Power Supply:-  12v DC @ 500ma.
Input Connections:

Pull Cord with Re-Assurance LED.
Remote Call Button with Re-Assurance LED and Illuminated Call Button.
Remote Audio/Visual Indicator with Illuminated Reset Button.
Remote Reset Unit with Illuminated Button.
Outputs: Volt Free Changeover Relay Contacts Rated 1A @ 24v DC for Remote Signalling.
Reset Button: Green Illuminated.
Call Indicator: 20mm Flashing Red LED.
Sounder:85db @ 10cm, 2.3kHz.
Faceplate Text: "RESET" in red.
Faceplate Symbol: Disabled symbol in black.
Pullcord: N/O contacts with red LED re-assurance lamp and red pull cord.
Pull Cord: N/O contacts rated 1A @ 24v DC.
Pull Cord Re-Assurance Lamp: 5mm LED                         
Current Consumption: 10 ma Quinsient, 80 ma Active
Weight: 1.0Kg.
Faceplate Size:85 x851mm.


Meets the requirements of the Disability Discrimination Act 1995                                          
    

 

!
Only

Heavy Duty (Push To Open) Flush Mount Disabled Button

W4S-3F
Heavy duty s/s  square disabled exit button,engraved with the disabled symbol and text push to open , SPDT voltage free
contacts, flush mount with backbox.

W4S-3 STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN" and a disabled symbol  on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with flush mount backbox, black surface mounting box available seperataly.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Flush Box Dimensions: 97 x 50 x 40mm
Faceplate engraving: Disabled Symbol and text "PUSH TO OPEN"
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 550g.                               
                                                

 

!

Heavy Duty (Push To Open) Disabled Surface Mount Exit Button

W4S-3S
Heavy duty s/s  square disabled exit button,engraved with the disabled symbol and text push to open , SPDT voltage free
contacts, surface mount black backbox.

W4S-3S STAINLESS STEEL EXIT BUTTON

Heavy duty square stainless steel all action operated exit button, engraved with the text
"PUSH TO OPEN" and a disabled symbol on the faceplate.
Changeover relay contacts rated 15A @ 240/125v AC.Dependable and responsive action
accross the whole plate, easy to install. Comes complete with flush mounting backbox.
For connecting to any access control system, door operators, or for switching lock loads.

Supplied with black surface mount backbox.


                                               TECHNICAL DATA

Faceplate: Stainless Steel.(114 x 114 x 10)mm
Surface Box Dimensions: 115 x 115 x 45mm
Faceplate Engraving: Disabled Symbol and text "PUSH TO OPEN"
Switching Output:- SPDT Voltage Free Relay Contacts.
Switching Capacity:-240/115v AC @ 15A.
Connection Terminals: Spade connectors.
Weight: 670g.                               
                                                

 

!